Petrology and geochemistry of mafic and ultramafic cumulate rocks from the eastern part of the Sabzevar ophiolite (NE Iran): Implications for their petrogenesis and tectonic setting     

《地学前缘(英文版)》2020,11(6):2347-2364

The Late Cretaceous Sabzevar ophiolite represents one of the largest and most complete fragments of Tethyan oceanic lithosphere in the NE Iran. It is mainly composed of serpentinized mantle peridotites slices; nonetheless, minor tectonic slices of all crustal sequence constituents are observed in this ophiolite. The crustal sequence contains a well-developed ultramafic and mafic cumulates section, comprising plagioclase-bearing wehrlite, olivine clinopyroxenite, olivine gabbronorite, gabbronorite, amphibole gabbronorite and quartz gabbronorite with adcumulate, mesocumulate, heteradcumulate and orthocumulate textures. The crystallization order for these rocks is olivine ​± ​chromian spinel → clinopyroxene → plagioclase → orthopyroxene → amphibole. The presence of primary magmatic amphiboles in the cumulate rocks shows that the parent magma evolved under hydrous conditions. Geochemically, the studied rock units are characterized by low TiO₂ (0.18–0.57 ​wt.%), P₂O₅ (<0.05 ​wt.%), K₂O (0.01–0.51 ​wt.%) and total alkali contents (0.12–3.04 ​wt.%). They indicate fractionated trends in the chondrite-normalized rare earth element (REE) plots and multi-element diagrams (spider diagrams). The general trend of the spider diagrams exhibit slight enrichment in large ion lithophile elements (LILEs) relative to high field strength elements (HFSEs) and positive anomalies in Sr, Pb and Eu and negative anomalies in Zr and Nb relative to the adjacent elements. The REE plots of these rocks display increasing trend from La to Sm, positive Eu anomaly (Eu/Eu1 ​= ​1.06–1.54) and an almost flat pattern from medium REE (MREE) to heavy REE (HREE) region [(Gd/Yb)_N ​= ​1–1.17]. Moreover, clinopyroxenes from the cumulate rocks have low REE contents and show marked depletion in light REE (LREE) compared to MREE and HREE [(La/Sm)_N ​= ​0.10–0.27 and (La/Yb)_N ​= ​0.08–0.22]. The composition of calculated melts in equilibrium with the clinopyroxenes from less evolved cumulate samples are closely similar to island arc tholeiitic (IAT) magmas. Modal mineralogy, geochemical features and REE modeling indicate that Sabzevar cumulate rocks were formed by crystal accumulation from a hydrous depleted basaltic melt with IAT affinity. This melt has been produced by moderate to high degree (~15%) of partial melting a depleted mantle source, which partially underwent metasomatic enrichment from subducted slab components in an intra-oceanic arc setting.  相似文献   

点吸收式波浪能俘获装置结构优化方法研究     

王鑫  李大鸣  王兵振  韩林生 《海洋与湖沼》2020,51(2):293-297

根据布设海域波浪能资源特征,对点吸收式波浪能装置结构进行优化,可有效提高装置的能量俘获效率。本文以威海褚岛北部海域为装置布设目标海域,在对该海域波浪资源特征进行统计分析的基础上,计算得到装置的直径,同时利用数值软件计算出多组工况下点吸收装置吃水深度和装置固有周期的对应关系,并利用统计学方法得出装置固有周期随吃水深度的变化规律,进而分析得出装置在该海域的最佳设计吃水深度,为点吸收波浪能装置结构优化设计提供了新的思路。该方法对于其他技术类型波浪能装置的结构优化设计同样具有借鉴意义。  相似文献   

秦皇岛近岸海域潮间带砂质沉积物中微塑料和重金属污染特征   总被引：1，自引：0，他引：1  

陈月琴  罗维  孙聪慧  吴光红 《海洋学报》2020,42(4):113-121

基于密度分离原理，利用饱和NaCl溶液对秦皇岛近岸海域潮间带砂质沉积物中的微塑料进行了浮选和分离提取，采用显微红外光谱方法分析附着在滤膜上的微塑料颗粒形貌和材质。结合扫描电子显微镜?能谱仪(Scanning Electron Microscopy Energy Dispersive Spectrometer，SEM-EDS)对微塑料样品进行微观形貌观察及微区成分的分析。并采用地累积指数(Geo Accumulation Indexes，I_geo)和富集系数(Enrichment Factors，EF)分析砂质沉积物中重金属Hg、Cd和Pb污染水平和富集特点。分析砂质沉积物中烧失量(Loss on Ignition，LOI)、总有机碳(Total Organic Carbon，TOC)、总氮(Total Nitrogen，TN)以及碳氮的稳定同位素组成(δ13C和δ15N)，探讨有机质的可能来源。结果表明:秦皇岛近岸海域潮间带砂质沉积物中有纤维类、发泡类、薄膜类3种微塑料，以纤维类的微塑料为主。微塑料表层富集有Si、Al、Mg、Fe和Ca等元素。沉积物中Hg和Cd富集水平较高，Pb富集水平较低。沉积物TOC和TN含量较低，LOI为TOC的1.6倍，δ13C、δ15N和TOC/TN的数值范围均显示有机质以海洋浮游植物藻类等海源为主。  相似文献   

北极薄冰-煎饼冰区域中不同重力波驱动形成海流的敏感性分析     

张雪妍  戴海瑨  赵军  殷何卿 《海洋学报(英文版)》2020,39(3):123-129

A coupled ocean-ice-wave model is used to study ice-edge jet and eddy genesis during surface gravity wave dissipation in a frazil-pancake ice zone. With observational data from the Beaufort Sea, possible wave dissipation processes are evaluated using sensitivity experiments. As wave energy dissipated, energy was transferred into ice floe through radiation stress. Later, energy was in turn transferred into current through ocean-ice interfacial stress. Since most of the wave energy is dissipated at the ice edge, ice-edge jets, which contained strong horizontal shear, appeared both in the ice zone and the ocean. Meanwhile, the wave propagation direction determines the velocity partition in the along-ice-edge and cross-ice-edge directions, which in turn determines the strength of the along-ice-edge jet and cross-ice-edge velocity. The momentum applied in the along-ice-edge(cross-ice-edge)direction increased(decreased) with larger incident angle, which is favorable condition for producing stronger mesoscale eddies, vice versa. The dissipation rate increases(decreases) with larger(smaller) wavenumber, which enhances(reduces) the jet strength and the strength of the mesoscale eddy. The strong along-ice-edge jet may extend to a deep layer(> 200 m). If the water depth is too shallow(e.g., 80 m), the jet may be largely dampened by bottom drag, and no visible mesoscale eddies are found. The results suggest that the bathymetry and incident wavenumber(magnitude and propagation direction) are important for wave-driven current and mesoscale eddy genesis.  相似文献   

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查新进展          下载免费PDF全文

赵胜金  于海洋  周颖帅  柳志辉  张猛  朴丽丽  武中华  张玉龙 《中国地质调查》2018,5(3):49-55

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查项目取得的新进展及主要成果为: 根据岩石组合、动植物化石及同位素年龄等,重新厘定、划分了16个岩石地层填图单位,在多个组段沉积岩层位中首次发现丰富的动、植物化石,建立了各地层年代学格架; 将侵入岩重新解体划分为4个填图单元,并建立了侵入岩年代学格架; 新发现1处规模较大的韧性变形带,主要为逆—左行走滑韧性断层,时代归属于中三叠世末期,为额尔古纳河—阿龙山NE向韧性变形域的南部延伸; 新发现矿(化)点20处,其中金属矿点3处,金属矿化点6处,非金属矿点9处,非金属矿化点2处; 总结了该区成矿规律,圈定了成矿远景区及找矿靶区。  相似文献   

余姚—丽水断裂带嵊州地区燕山期主要构造特征     

褚平利  陈荣  曾剑威  廖圣兵  杨祝良 《中国地质调查》2018,5(5):49-57

余姚—丽水断裂带是浙东南地区活动时间长、延伸远、发育比较宽的一条NE—NNE展布的断裂构造带,在浙江嵊州地区上火山岩系磨石山群和下火山岩系永康群中构造形迹表现十分明显。余姚—丽水断裂带由一系列NE—NNE向控制区内白垩纪盆地形成与发展的正断层,以及NE—NNE走向、自北西向南东逆冲的叠瓦状断层和轴迹呈NE—NNE向的褶皱组成。通过对其构造活动特征及控制新老地层的时序关系研究,结合区域构造活动规律和时空演化关系等综合分析认为: 正断层形成时间较早,控制白垩纪盆地的形成和发展,与早白垩世岩石圈伸展减薄形成的拉张作用密切相关; 叠瓦状逆冲断层及斜歪褶皱、紧闭同斜褶皱等褶、断构造组合形成于晚白垩世之后,其动力学机制可能与古太平洋构造域向太平洋构造域的转换效应有关。研究成果为深入探讨浙东地区燕山期构造演化提供了新的素材和资料。  相似文献   

桐柏杂岩南北边界剪切带的对比以及对桐柏造山带构造格局的制约     

李海龙  宋传中  韩建军  任升莲  李加好  张妍  王微  杨帆 《岩石学报》2018,34(3):813-836

桐柏杂岩的南北边界的剪切带分别是殷店-马垅韧性剪切带和晓天-磨子潭韧性剪切带,这两条韧性剪切带内都发育杆状构造,且杆状构造具有层状结构,层与层之间通过一种特殊的滑脱面结合。由于晓天-磨子潭韧性剪切带相对于殷店-马垅剪切带位置明显更靠近商丹断裂带,早期商丹断裂带的活动在岩石中留下的变形痕迹导致了后期晓天-磨子潭韧性剪切带的变形程度要略强于殷店-马垅剪切带。这两条剪切带都是以简单剪切为主的剪切带,变质条件也相似,都属于角闪岩相变质,处于中-下地壳流变层位置。U-Pb同位素测年结果显示,晓天-磨子潭韧性剪切带的活动年龄为171~142Ma,殷店-马垅韧性剪切带的活动年龄为164~137Ma,两条剪切带的主活动期都在中-晚侏罗世,在早白垩世随着岩浆活动的峰期到来慢慢减弱停止。桐柏造山带在印支晚期碰撞挤压背景下的向东挤出不是一个整体的挤出,而是有层次的差异挤出,挤出的同时层与层之间会发生滑动,滑脱面类似滑动的润滑剂,酷似"管状流动"的构造。在晓天-磨子潭韧性剪切带和殷店-马垅韧性剪切带的牵引作用下,整个桐柏造山带由西向东发生管状流动。  相似文献   

剪切带型金矿中金沉淀的力化学过程与成矿机理探讨   总被引：2，自引：1，他引：1  

程南南  刘庆  侯泉林  卫巍  石梦岩  何苗  郭谦谦 《岩石学报》2018,34(7):2165-2180

剪切带型金矿是一种重要的金矿床类型,有关该类型金矿的成因问题已开展了大量研究,但对于剪切带中金的沉淀析出机制和成矿过程仍存在较大争议,对于赋矿部位的构造属性与矿床关系的研究尚显薄弱。对此笔者整理分析了近年来国内外有关剪切带型金矿的研究进展,并结合我国胶东金矿的研究实例,运用断层阀和力化学理论分析发现,无论是脆性还是韧性剪切带,无论是脉型还是蚀变岩型金矿,其成矿的关键部位均与构造应力集中而导致的脆性破裂(特别是R、T、R’破裂的产生)和碎裂作用以及(多期)岩体侵位密切相关,并且脆性破裂所导致的压力骤降从而引发流体闪蒸的力化学过程可能是造成金沉淀析出成矿的有效机制,其中多期岩体侵位所提供的流体是成矿的物质基础。此外,从国内外实例可以看出,剪切带中的脆性破裂不仅发生于脆性或脆韧性构造域,也可以发生在较深层次的韧性构造域中,尽管韧性域中产生脆性破裂的原因还不十分清楚,但这可能是韧性剪切带成矿的关键机制之一。最后,综合岩体、流体、剪切带三者对成矿的耦合作用,文中提出剪切带型金矿的成矿机理为:(多期)岩体侵位-热液活动-构造剪切-应力集中-脆性破裂(碎裂)产生-压力骤降-流体闪蒸-元素(金)析出,如此循环往复方可形成大型剪切带型金矿。  相似文献   

陕西凤太矿集区多金属成矿作用的构造控制   总被引：3，自引：0，他引：3  

王义天  陈绍聪  胡乔青  张娟  刘协鲁  黄诗康 《岩石学报》2018,34(7):1959-1976

陕西凤县-太白(简称凤太)矿集区铅、锌、金、银、铜多金属资源丰富,已发现二十余个大中小型矿床。在大地构造位置上,凤太矿集区位于南秦岭造山带北缘,紧邻商丹缝合带。以往的工作缺乏对矿集区整体的构造研究,本次工作通过比较系统的构造测量和解析,提出在南秦岭晚三叠世碰撞造山过程中,凤太矿集区南北两条边界断裂带的左行走滑运动导致在区内衍生了NNE向主压应力场,从而形成了NWW向复式褶皱、脆韧性剪切带、断裂和节理(纵向破裂)、B型线理,以及NNE向断裂和节理(横向破裂)、劈理、张裂隙等一系列构造组合,所有构造形迹都是在统一构造应力场下随着构造层次不断抬升,脆韧性和脆性递进变形叠加的产物,共同构成了一个大型压扭性走滑双重构造变形系统。在构造几何学上,凤太矿集区整体上表现为一个隔档式复式褶皱,由一组NWW向紧闭复背斜和一组相对宽缓复向斜组成。区内的多金属成矿作用、岩浆活动、动力变质变形作用的同位素年龄数据集中于230~190Ma。综合地质演化和成矿作用的研究成果,提出在南秦岭碰撞造山过程中引发的动力变质变形作用和岩浆活动提供了成矿元素和成矿流体,在温压梯度以及浮力效应的驱动下向上运移至走滑双重构造变形系统中的有利扩容空间中发生充填型和交代型矿化,即凤太矿集区多金属矿床是区域大规模变形变质-岩浆活动-流体作用的产物,是在构造作用这一主导因素控制下形成的一个多金属后生热液成矿系统。  相似文献   

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?     

Sarfraz KHAN  Umair Bin NISAR  Khawar A. AHMED  Muhammad WASEEM  Waqas AHMED 《《地质学报》英文版》2018,92(4):1544-1557

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.  相似文献